Medicine dryer

Dear Saint Vincent and the Grenadines [Medicine dryer] customer, it is very lucky that you can find us in the vast information! Jushang drying equipment is a Chinese Medicine dryer product supplier. Since its establishment, has been deeply involved in the food and drug drying field and has provide innovative Medicine dryer products for food and drug drying customers! The following is the relevant information of Medicine dryer product organized by Jushang drying equipment for you. Jushang are willing to provide you with new Medicine dryer information to help you make a correct choice!

 

working principle:

The main principle of the medicinal material dryer used in the drying process is to use the heat pump evaporator to absorb the heat in the outside air, or to recover the residual heat of the exhaust gas during the drying process, and then carry (transfer) the energy to the drying box through the compressor to work. The hot air in the drying box is heated repeatedly to absorb the moisture in the material, cool and humidify itself, and then through the process of hot air dehumidification or condensation, The water in the material will be drained away by water, and the continuous drying of the material will be realized in the end. The output temperature of the good high is 85 ℃.

Scope of application:

The drying machine for medicinal materials is mainly used for drying, heating and heat treatment of product test articles by industrial and agricultural supply, scientific research, medical and health, laboratory and other units. The temperature of this drying oven can be adjusted from 10 ℃ to 300 ℃, and the temperature can be automatically controlled by the temperature control system in the oven. The digital dawn temperature controller is adopted, which is sensitive and reliable, easy to operate, and the digital display is more intuitive and clear. It is used as a test or supply line for laboratories of universities, medical and health, environmental protection and other scientific research departments, as well as for industry, mining and agriculture. This machine is equipped with an air blowing device. The air enters the working chamber from the air duct, which promotes the circulation and convection of hot air in the working chamber, thus having better temperature uniformity.

Equipment parameters:

Specification and model

WG6

WG8

WG10

WG12

WG16

WG20

WG24

WG30

Network bandwidth (mm)

600

800

1000

1200

1600

2000

2400

3000

Length of drying section (m)

6-12

6-12

6-16

8-16

8-22

10-26

12-30

12-40

Length of feeding section (m)

1

1

1

1

1

1.5

1.5

2

Transmission section length (m)

1

1

1

1

1

1.5

1.5

2

Dry surface (m2)

3.6-36

4.8-48

6-80

7.2-96

12.8-105.6

20-260

28.8-360

36-600

Number of layers

1-5

Layer spacing mm

400-600

Bearing capacity

90-200 Kg/m2

Service temperature

Carbon steel ≤ 400 C °，Stainless steel ≤ 600 C °

Evaporation intensity

5-20 kg water/m2. h
Heat source

Hot air, electricity and steam

Operating speed

0.06-1m/min

Transmission power Kw

1.1-2.2

1.1-2.2

1.1-2.2

1.1-3

1.5-3

1.5-4

3-7.5

5-11

Supporting equipment

Conveying equipment, hot blast furnace, dust removal equipment, induced draft fan, etc
Pre : Vegetable dryer
Next : None
scene